Operation: Manual

Wilton Oscillating Sander

Used to remove a relatively large amount of wood from curved surfaces Different sized spindles to match the curve being sanded Spindle moves up and down as well as spinning to ensure smooth surfaces

Wet Belt Sander

Used for sanding and light duty grinding of composites and other plastics. Can be used wet. Special Hours: M 2:00-6:00 pm T 3:00-6:00 pm W 2:00-6:00 pm Th 9:00am-6:00pm

Uni-Hydro Iron Worker

Used for punching, shearing, notching and bending mild steel plate up to 5/8″ thick

Thermal Vacuum Former – Formech 686

Material size: 27×26″ Forming area: 25.5×24.5″ Max. depth of draw: 12.8″Max. material thickness: 1/4″ For more information: http://www.formech.com/Manual/686/686_content.htm

Tennsmith Shear

Used for cutting sheet metal and some plastics Up to 16 gauge mild steel

Tennsmith Brake

Used for bending sheet metal and some plastics Up to 12 gauge mild steel

Sunex Shop Press

Used for removing or installing press-fit components 20″ inside width 8.75″ horizontal support depth 5″ stroke

Shop Fox M1099 Lathe

Used for machining symmetrical geometeries in round stock 150 – 2400 rpm 1″ spindle bore 5″ three jaw chuck

Equipment Search

  • Material

  • Operation