The Universal VLS6.75 75W CO2 Laser Cutter is capable of cutting a variety of materials of various thicknesses. This laser cutter can: Cut materials such as Acrylic, Balsa wood, Bass wood, Acrylic, PETG, Polycarbonate, cardboard, some papers, amongst other things. Can cut materials up to around .5″ thick (depends heavily on the material). Engrave round … Continue reading Universal – VLS6.75 75W CO2 Laser Cutter – Laser Cutter
Archives: Resources
Useable item in a lab
Creality – Ender 3 V2 (Upgraded) – 3D Printer
The Creality Ender 3 V2 printer is a hobby grade printer capable of producing economical parts in PLA. This printer has a variety of upgrades made to it, allowing it to produce parts reliably. This printer can: Produce parts out of PLA. Produce parts economically. Produce parts up to 220 x 220 x 250mm … Continue reading Creality – Ender 3 V2 (Upgraded) – 3D Printer
Voron – Voron 2.4 – 3D Printer
The Voron 2.4 is a rigid, Core XY hobby printer capable of making fairly large prints, quickly out of a variety of materials. This printer can: Print parts as large as 300mm by 300mm by 350mm. Print a variety of different materials. Can create fairly high quality parts, fairly quickly. Can make economical parts.
Creaform – HandyScan 3D Black Elite – 3D Scanner
The HandyScan 3D Black Elite 3D scanner is a highly accurate, hand-held scanner capable of high-resolution scanning that can be used for reverse engineering parts as well as for metrology purposes. The scanner: Has an accuracy and measurement resolution of .025mm (.0009 in) Can scan parts ranging from .05 – 4m (.15 – 13ft) Can … Continue reading Creaform – HandyScan 3D Black Elite – 3D Scanner
Formlabs – Form 3 – 3D Printer
The Formlabs Form 3 is a Low Force Stereolithography printer, that uses a laser cured resin as opposed to melted plastic. It has a wide variety of materials it can print. The machine has a work envelope of 5.7″ x 5.7″ x 7.3″. The layer height can be adjusted between 0.001″ – 0.012″. To view … Continue reading Formlabs – Form 3 – 3D Printer
A/V Equipment
Students may borrow equipment free of charge* from the College of Design’s Output Center located at 426 Design. Checkout periods vary depending on the type of equipment. A chart is provided at bottom of this page. Equipment Available for Checkout Canon Rebel 2000 EFS-mount SLR Cameras (Film not provided) with 18-135mm Kit Lens (No other … Continue reading A/V Equipment
Universal Laser Cutter ILS12.150D
The College of Design has three laser cutters, located in room 426 Design (The Output Center). The laser cutters are open to use by students, faculty, and staff, as long as the required online training has been successfully completed. CORE students in Design are not eligible for laser cutter training, due to the nature of … Continue reading Universal Laser Cutter ILS12.150D
Universal Laser Cutter ILS12.150D
The College of Design has three laser cutters, located in room 426 Design (The Output Center). The laser cutters are open to use by students, faculty, and staff, as long as the required online training has been successfully completed. CORE students in Design are not eligible for laser cutter training, due to the nature of … Continue reading Universal Laser Cutter ILS12.150D
